Travis Olander<\/a>\u00a0\u00a0\u00a012.21.22<\/p>\n<\/div>\n The UV-5R has loads of options, however it may be troublesome to arrange. This information covers all 40 capabilities of the UV-5R Menu in depth, educating you easy methods to configure channels and superior capabilities.<\/p>\n
New to Ham Radio? Read Our Other Guides<\/h2>\nAccessing The UV-5R Menu<\/h2>\n Power on the radio. The antenna doesn’t must be related. Press the MENU button on the keypad. While programming, place your radio on LOW energy. To do that, press the # button. You will see an \u201cH\u201d, \u201cM\u201d, or \u201cL\u201d within the top-left nook of the display screen, indicating HIGH, MEDIUM, and LOW energy. If your keypad is just not functioning, it is perhaps locked. A small key icon subsequent to the display screen\u2019s battery indicator shall be current. Press and maintain the # button to unlock the keypad.<\/p>\n
How the Menu Works<\/h2>\n The UP and DOWN arrows mean you can navigate by means of all menu choices. You can soar to particular choices by typing in that choice\u2019s menu quantity. For instance, urgent MENU and keying in \u201c14\u201d will carry you to choice 14, which controls the radio\u2019s voice prompts. The MENU button additionally acts because the ENTER and SAVE\/CONFIRM button. Once you navigate to the choice you want to modify, press the MENU button a second time to entry the choice\u2019s out there decisions.<\/p>\n
Select the selection you need to use with the UP\/DOWN arrows, or by typing within the obligatory worth with the keypad. Then press the MENU button a 3rd time to SAVE\/CONFIRM the selection. The EXIT button brings you again to the principle display screen.<\/p>\n
(The Important Settings, First)<\/h2>\n If you simply need to get your UV-5R up and working, deal with these settings. To be taught extra about what each does, reference the record of choices additional down within the information.<\/p>\n
\nSquelch<\/strong> (Option 0).<\/strong> We advocate setting your squelch to 1 to five. One is minimal sensitivity, 5 is reasonable. Anything greater, and also you may not hear incoming transmissions.<\/li>\nTXP (Option 2). <\/strong>To make sure you get good vary, set transmit energy (TXP) to HIGH. While programming and utilizing your radio at shut vary, set it to LOW.<\/li>\nSAVE (Option 3). <\/strong>Turn off \u201cBattery Saver\u201d. Having this on could end in missed transmissions.<\/li>\nTDR (Option 7). <\/strong>The UV-5R can monitor two frequencies directly. With TDR on, the radio will change to whichever frequency is receiving a sign (A or B). We\u2019re not suggesting you flip this on or off \u2014 it\u2019s private desire. But maintain it in thoughts.<\/li>\nVoice (Option 14).<\/strong> Tired of the UV-5R providing you with annoying voice prompts? Turn this feature off.<\/li>\nAL-MOD (Option 32). <\/strong>Ensure the Alarm Mode is ready to \u201cSITE\u201d. Holding down the orange CALL button will journey an annoying alarm. The \u201cSITE\u201d mode solely journeys the alarm on the radio\u2019s speaker. The different choices will transmit that alarm over the air, annoying anybody who\u2019s listening.<\/li>\n<\/ol>\nOption 0: Squelch<\/h2>\n Squelch acts like a noise gate, or filter. It ranges from 0 to 10. When set to 0, the chosen frequency or channel shall be energetic always. You will hear static if nobody is transmitting. Setting Squelch to 1 supplies essentially the most sensitivity with out listening to static always. This permits you to obtain weak or damaged transmissions. Higher Squelch decreases sensitivity, permitting solely robust or close by transmission to come back by means of.<\/p>\n
Option 1: Step<\/h2>\n Frequency stepping. This determines how a lot the frequency goes up or down when urgent the UP\/DOWN arrows, or whenever you\u2019re scanning. This is simply relevant in VFO (Frequency) Mode. By default, the UV-5R steps up or down in 25 KHz increments.<\/p>\n
Option 2: TXP<\/h2>\n Transmit energy. Its perform is redundant to the # key. Some UV-5Rs have \u201cHIGH\u201d and \u201cLOW\u201d choices, for minimal and most energy. Newer fashions embody a \u201cMEDIUM\u201d choice, which operates at half energy. The base UV-5R can transmit at 1 or 4 watts. Some variants can function at 5, 8, or 10 watts.<\/p>\n
Option 3: Save<\/h2>\n Battery saver. Enabling it reduces how typically the radio listens for transmissions. Its values vary between OFF, and 1 to 4. The greater the worth, the much less typically the radio listens. We don\u2019t advocate utilizing this perform. When enabled, chances are you’ll not choose up transmission from those that are trying to contact you. This is undesirable in an emergency state of affairs.<\/p>\n
Option 4: VOX<\/h2>\n With VOX enabled, the radio will routinely transmit when it hears your voice. The out there ranges (1 to 10) dictate how delicate the VOX is. This perform is beneficial when you could use the radio hands-free, or whenever you\u2019re utilizing a headset.<\/p>\n
Option 5: WN<\/h2>\n Narrowband or Wideband. The latter choice supplies higher protection and vary. Narrowband is beneficial for decreasing interference between customers transmitting and receiving on related frequencies.<\/p>\n
Option 6: ABR<\/h2>\n Automatic Backlight. Values vary from 0 (at all times off) to 10 (seconds till the backlight turns off).<\/p>\n
Option 7: TDR<\/h2>\n Dual Receive Function. When enabled, the radio will concurrently monitor and obtain transmissions on each A and B channels or frequencies you\u2019ve chosen on the principle display screen. Turning off TDR permits you to power the radio to solely monitor the road you\u2019ve chosen with the A\/B button.<\/p>\n
Option 8: Beep<\/h2>\n This perform turns the important thing press beeps on or off.<\/p>\n
Option 10: TOT<\/h2>\n Transmit over time. This perform\u2019s values vary from 0 (off) to 600 seconds. This governs the size of time till transmission ceases, even when the PTT button is held. Turning this perform off permits for steady transmission so long as PTT is held.<\/p>\n
Options 10-13: R-DCS \/ R-CTCS \/ T-DCS \/ T-CTCS<\/h2>\n DCS and CTCS are inaudible tones that your radio transmits (\u201cT-\u201c) or receives (R-\u201c), in addition to regular voice communication. In lay terms, these tones allow users to share a single frequency without interfering with others. When you and another radio operator use the same DCS or CTCS tone, you can talk to each other privately. Think of it like a one-on-one chatroom inside a larger server.<\/p>\n
Of course, anyone else also using the same tone can listen in or transmit. DCS and CTCS tones are\u00a0 required for accessing repeaters, which function as range extenders. There are 50 available CTCSS tones, and 105 available DCS tones.<\/p>\n
Option 14: Voice<\/h2>\n Like we mentioned, this function dictates what language the radio\u2019s onboard voice prompt uses. The prompts can be turned off, too.<\/p>\n
Option 15: ANI-ID<\/h2>\n Automatic Number Identification. This function allows your radio to broad to other radios a particular ID or callsign in alphanumeric text. This can only be programmed with CHIRP software. This is not applicable to general use, and should be disregarded.<\/p>\n
Option 16: DTMFST<\/h2>\n Dual Tone Multi-Frequency. This function allows the radio to broadcast button-pressed tones. This is similar to pressing buttons on a phone\u2019s keypad while on a call. The receiver can hear those tones.<\/p>\n
Option 17: S-CODE<\/h2>\n Signal Code. This function works in tandem with DTMF codes. CHIRP is required to program this function. This is not applicable to general use, and should be disregarded.<\/p>\n
Option 18: SC-REV<\/h2>\n Scan Resume Method. Selecting TO, CO, or SE tells the radio what to do when it stops scanning to listen to a transmission on the frequency it found.<\/p>\n
\nTO: The scan stops when a signal is detected, but resumes after 5 seconds.<\/li>\n CO: The scan stops when a signal is detected, but resumes when it disappears.<\/li>\n SE: The scan stops permanently when a signal is detected. The radio remains on that frequency.<\/li>\n<\/ul>\nOption 19: PTT-ID<\/h2>\n Push-to-Talk ID. This function works in tandem with Option 17. It determines when an ID is transmitted via the PTT button. Options allow the ID to be sent at the beginning (BOT) or end of a transmission (EOT), or both. This function is not applicable to general use, and should be disregarded.<\/p>\n
Option 20: PTT-LT<\/h2>\n Push-to-Talk Lag Time. It works in tandem with Options 17 and 19. This function is not applicable to general use, and should be disregarded.<\/p>\n
Option 21: MDF-A<\/h2>\n This option governs how the top line on the main screen is displayed. \u201cFREQ\u201d shows the programmed frequency, \u201cCHAN\u201d shows the channel quantity, and \u201cNAME\u201d shows the channel identify if one was entered by the consumer utilizing CHIRP.<\/p>\n
Option 22: MDF-B<\/h2>\n This choices governs how the underside line on the principle display screen is displayed. Again, choices embody \u201cFREQ,\u201d \u201cCHAN,\u201d or \u201cNAME.\u201d<\/p>\n
Option 23: BCL<\/h2>\n Busy Channel Lockout. Enabling this perform prevents you from transmitting on a busy frequency. It is beneficial for guaranteeing you don\u2019t interrupt or overpower one other consumer.<\/p>\n
Option 24: AUTOLK<\/h2>\n Automatic Keypad Lock. When this perform is enabled, the keypad will lock after 8 seconds.<\/p>\n
Option 25: SFT-D<\/h2>\n Frequency Shift Direction. This allows the radio to entry repeaters in VFO (Frequency) Mode. Setting up a repeater in Freq Mod shall be lined in a standalone information.<\/p>\n
Option 26: OFFSET<\/h2>\n Channel Shift Direction. This allows the radio to entry repeaters in MR (Channel) Mode. This can even be lined in a standalone information.<\/p>\n
Option 27: MEM-CH<\/h2>\n Store Channel in Memory. This permits you to assign a frequency to a channel within the radio\u2019s reminiscence, saving it for later use. You can save as much as 128 channels (0 to 127).<\/p>\n
Option 28: DEL-CH<\/h2>\n Delete Channel in Memory. Self-explanatory; chances are you’ll choose a saved frequency and delete it from the radio\u2019s channel reminiscence.<\/p>\n
Option 29: WT-LED<\/h2>\n Display Color in Standby Mode. This permits you to choose the colour of the backlit display screen when urgent buttons or interacting with the radio.<\/p>\n
Option 30: RX-LED<\/h2>\n Display Color When Receiving. This permits you to choose a distinct backlit coloration when the radio is receiving a transmission. This is beneficial for monitoring for a transmission whenever you need the audio muted.<\/p>\n
Option 31: TX-LED<\/h2>\n Display Color When Transmitting. Self-explanatory; choose the backlit coloration that illuminates when the PTT button is pressed to transmit.<\/p>\n
Option 32: AL-MOD<\/h2>\n Alarm Mode. Holding down the CALL button on the radio will provoke an audible alarm. This perform determines how that alarm capabilities. \u201cSITE\u201d mode means the alarm solely bursts by means of the radio itself, with out transmitting over a channel or frequency. \u201cTONE\u201d mode will transmit the alarm sound, too. \u201cCODE\u201d mode means the alarm transmits a collection of numbers as keypad presses. This perform is mostly irrelevant and must be disregarded.<\/p>\n
Option 33: BAND<\/h2>\n Band Selection. In VFO (Frequency) Mode, this determines whether or not the A or B line is ready to VHF or UHF bands. Like the \u201cBAND\u201d button on older fashions, this perform is irrelevant and must be disregarded.<\/p>\n
Option 34: TDR-AB<\/h2>\n With TDR, or \u201cDual Receive Function\u201d (choice 7) enabled, this perform determines which line, A or B (high or backside) the radio returns to after receiving a sign, or when urgent the PTT button. If OFF, the radio will keep on the final frequency whereby it acquired a sign. If set to B, the radio will change to the B line by default. If set to A, the radio will change to the A line by default.<\/p>\n
Option 35: STE<\/h2>\n Squelch Tail Eliminator. This makes an attempt to remove the standard \u201cpop\u201d or burst of static noise on the finish of a transmission or sign. The radio you’re speaking with should additionally help this perform for it work in your radio.<\/p>\n
Option 36: RP-STE<\/h2>\n Squelch Tail Eliminator for Repeaters. This capabilities like Option 35. The repeater in query should additionally help this perform for it work in your radio.<\/p>\n
Option 37: RPT-RL<\/h2>\n Repeater Lag Time. This dictates how lengthy, after releasing the PTT button, the Repeater Squelch Tail Eliminator waits to kick in. This perform is mostly irrelevant and must be disregarded.<\/p>\n
Option 38: PONMSG<\/h2>\n Power-On Menu Message. \u201cFULL\u201d shows your entire LCD display screen when powering on. \u201cMSG\u201d shows a easy 2-line Power On Message.<\/p>\n
Option 39: ROGER<\/h2>\n Roger Beep. When enabled, the radio bursts a easy beep tone when the PTT button is launched. This lets customers know you’re completed transmitting. It\u2019s helpful for guaranteeing listeners perceive your transmission was despatched in full, and didn\u2019t minimize out or break.<\/p>\n
Option 40: RESET<\/h2>\n WARNING: <\/strong>This is equal to a manufacturing facility reset. The \u201cALL\u201d perform deletes all<\/em> saved channels, frequencies, menu choices, and different programming. The \u201cVFO\u201d perform resets all menus choices, nevertheless it retains saved channels. Now that you understand how all 40 menu capabilities work, proceed to Part 4: Basic Radio Programming (Frequencies and Channels).<\/a><\/p>\n Travis Olander<\/a><\/p>\n Travis is a retired Joint Fires NCO, firearm collector, and long-range shooter with a penchant for previous militaria. He evaluations weapons, knives, tactical package, and tenting and mountain climbing gear.<\/p>\n<\/div><\/div>\n
[ad_2]<\/p>\n","protected":false},"excerpt":{"rendered":"
[ad_1] Travis Olander\u00a0\u00a0\u00a012.21.22 The UV-5R has loads of options, however it may be troublesome to arrange. This information covers all 40 capabilities of the UV-5R Menu in depth, educating you easy methods to configure channels and superior capabilities. New to Ham Radio? Read Our Other Guides Accessing The UV-5R Menu Power on the radio. The […]<\/p>\n","protected":false},"author":1,"featured_media":18986,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"fifu_image_url":"https:\/\/www.alloutdoor.com\/wp-content\/uploads\/2022\/12\/the-ham-radio-guide-part-3-menu-functions.jpg","fifu_image_alt":"","footnotes":""},"categories":[34],"tags":[],"class_list":{"0":"post-18984","1":"post","2":"type-post","3":"status-publish","4":"format-standard","5":"has-post-thumbnail","7":"category-outdoor"},"_links":{"self":[{"href":"https:\/\/hoptraveler.com\/index.php\/wp-json\/wp\/v2\/posts\/18984","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hoptraveler.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/hoptraveler.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/hoptraveler.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/hoptraveler.com\/index.php\/wp-json\/wp\/v2\/comments?post=18984"}],"version-history":[{"count":0,"href":"https:\/\/hoptraveler.com\/index.php\/wp-json\/wp\/v2\/posts\/18984\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hoptraveler.com\/index.php\/wp-json\/wp\/v2\/media\/18986"}],"wp:attachment":[{"href":"https:\/\/hoptraveler.com\/index.php\/wp-json\/wp\/v2\/media?parent=18984"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/hoptraveler.com\/index.php\/wp-json\/wp\/v2\/categories?post=18984"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/hoptraveler.com\/index.php\/wp-json\/wp\/v2\/tags?post=18984"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
![\"UV-5R](\"https:\/\/i2.wp.com\/www.alloutdoor.com\/wp-content\/uploads\/2022\/12\/the-ham-radio-guide-part-3-menu-functions.jpg)
![\"UV-5R](\"https:\/\/i1.wp.com\/www.alloutdoor.com\/wp-content\/uploads\/2022\/12\/the-ham-radio-guide-part-3-menu-functions.jpg?ssl=1)