MSR Lightning Trail Snowshoe Review

0
137
MSR Lightning Trail Snowshoe Review


MSR Lightning Trail Snowshoe Review

The MSR Lightning Trail Snowshoe is an ultralight snowshoe designed for snowshoeing over rolling hills and degree terrain, that includes a serrated 360-degree body, horizontal struts, and toe crampon. MSR modified the binding on the Lightning Trails this yr, changing the previous (fussy) DuoFit binding which used ski straps with the brand new Paraglide binding which holds the entrance of your winter boots with stretch mesh and comes with a locking heal strap that may be simply adjusted whereas sporting gloves. The added good thing about the Lightning Trail Snowshoe is that it’s fairly light-weight, solely weighing 3 lbs 3 oz within the 22″ inch dimension and three lbs 5 oz per pair within the 25″ snowshoe size. That’s fairly mild so far as snowshoes go.

Specs at a look

  • Size examined: 25″ (additionally accessible in a dimension 22″ males’s and ladies’s fashions)
  • Weight: 3 lbs 5 oz (per pair)
  • Footwear dimension vary: 3 M – 13 M / 5 W – 15 W
  • Televator: No

Lightning Trail Frame

MSR revolutionized snowshoe design about 10 years in the past once they launched the serrated snowshoe body discovered on their Lightning sequence snowshoes together with the Lightning Trail. The toothed body is designed to enhance the standard toe crampon discovered below the ball of the foot and to stop slippage when side-hilling throughout slopes in rolling terrain.  The body additionally incorporates horizontal struts, additionally serrated, that present traction, particularly when braking on downhills.

MSR was the first company to put teeth into the frame for added traction.
MSR was the primary firm to place enamel into the body for added traction.

The body and the struts additionally stop “snowballing” which happens when snow and ice clump underfoot so it looks like you’re strolling on prime of bowling balls. This occurs on any form of toothed traction system, together with microspikes, and the step-in or strap-on crampons that you simply connect to winter mountain climbing and mountaineering boots. Since the horizontal rear crampons will not be boxed crampons, however serrated horizontal struts constructed into the body, snowballing can’t happen. It’s nonetheless very modern.

The result’s a really secure, low-profile snowshoe that gives good flotation and traction on packed trails and in reasonable powder. The body has a reasonable diploma of torsional flex for climbing over obstructions like fallen timber or rock however lacks the traction of the heavier MSR Lightning Ascent Snowshoe which appears fairly much like the Lightning Trail however is way heavier and has extra aggressive traction. But in the event you don’t want the televator bar on the Lightning Ascent, designed for climbing steeply inclined terrain, the Lightning Trail is a superb possibility as a result of it’s so light-weight however nonetheless durably made.

The front mesh positions the front of your boot properly over the toe crampon
The entrance mesh positions the entrance of your boot correctly over the toe crampon

New Paraglide Binding

The new Paraglide binding has two elements: a stretch mesh that positions your boot correctly within the binding and a locking heel strap. Both are usable whereas sporting gloves. The stretch mesh distributes stress evenly throughout the highest of your boot and eliminates the binding scorching spots that occurred with the outdated DuoLock ski strap binding discovered on this snowshoe. The new locking heal strap additionally replaces a ski strap which had the undesirable behavior of ceaselessly popping open.

The new Paraglide Binding has a locking mechanism that remains reliably shut.
The new Paraglide Binding has a locking mechanism that’s straightforward to regulate with out excessive contortions!

The straps securing the entrance mesh and the heel strap have a easy locking mechanism that inserts a plastic plug into a versatile strap with holes punched into it. Pulling on the ends of the straps repositions the plug alongside the strap, securing it in place so it received’t come undone. The locking mechanism has glove pulls hooked up to it and pulling on them releases the plastic plug, permitting the straps to maneuver freely within the binding so you’ll be able to take away your ft. While there’s some further strap size, it’s positioned on the surface aspect of the foot or within the rear, the place it’s out of the best way.

Here’s a video, revealed by MSR that reveals the Paraglide binding in motion. Fast ahead to 1:04 for a demo of the brand new Paraglide binding.

I used to be little involved after I acquired these snowshoes as a result of I haven’t had one of the best of luck with the locking mechanism on the heel straps of snowshoes from different producers as a result of it tends to pop open. The largest challenge is the place of the slack portion of the heel strap previous the purpose the place the pin locks into the holes within the heel strap. If it’s allowed to flap loosely, it should pull the locking pin out and the heel strap will come undone.

My Lightning Trail snowshoes got here with a plastic clip, which retains the slack portion of the strap adjoining to the portion of the strap on the within of the locking pin so it doesn’t flap loosely. The drawback is that these plastic clips break very simply. One hack is to make use of a jawed binder clip to carry the 2 sections of the strap collectively or to style a “tube” of duct tape with the sticky sides dealing with one another to interchange the plastic clip with one thing that can last more. You’d determine that MSR might provide a extra everlasting part for this objective, however it’s straightforward sufficient to hack round in the event you expertise it. Still, you need to surprise…

The plastic clip keeps the two halves of the strap aligned and prevents the heel strap from popping unlocked
The plastic clip retains the 2 halves of the strap aligned and prevents the heel strap from popping unlocked

Recommendation

The MSR Lightning Trail Snowshoe is a light-weight snowshoe designed for rolling terrain that’s straightforward to hold with a backpack as a result of it has a fold-flat binding. The newest mannequin has a brand new binding which is significantly better and extra dependable than the earlier one which used elastic ski straps. If you don’t have to climb steep hills or mountains and need a snowshoe that’s good for mountain climbing alongside packed trails, the Lightning Trail is a wonderful alternative. It’s very light-weight and its fold-flat binding makes it straightforward to connect to the surface of a backpack, making it good for these days if you may require snowshoes, however don’t have sufficient details about path situations to know in the event that they’ll be required.

I simply want MSR would put the brand new Paraglide binding used on the Lightning Trail on their dearer and technical snowshoes, the MSR Lightning Ascent and the MSR Evo Ascent. It could be a particular enchancment over the present fashions which nonetheless use elastic ski straps (which I’ve already communicated to them.)

Disclosure: MSR donated snowshoes for this evaluate.

Compare 5 Prices

Last up to date: 2022-11-28 18:25:06

SectionHiker is reader-supported. We independently analysis, check, and charge one of the best merchandise. We solely become profitable if you are going to buy a product by our affiliate hyperlinks. Help us proceed to check and write unsponsored and impartial gear critiques, newbie FAQs, and free mountain climbing guides.

LEAVE A REPLY

Please enter your comment!
Please enter your name here