The Banish Backcountry by Silencer Central is a intelligent little suppressor. As the title suggests, it was designed to be a light-weight choice for outdoorsmen to run a silencer on their searching rifle. In this function it succeeds admirably whereas additionally being versatile and useful. It is a neatly designed unit.
- Caliber: .300
- Length: 5.77 in. (measured, with 5/8-24 thread adapter)
- Diameter: 1.6 in.
- Baffle Bore Diameter: .350 in.
- Weight: 7.8 oz. (9.2 ounces with 5/8-24 thread adapter)
- Material: Titanium
- Finish: Cerakote
- Thread pitch: Selectable with out there adapters
- Cartridge vary: Up to .300 RUM
- Sound Reduction: 30dB
- Full-auto Rated: No
- Cost: $1,099
Banish Backcountry Features
The Banish Backcountry is a direct thread, fixed-length suppressor that accepts adapters to accommodate barrels with various thread pitches. The adapters thread into the again of the can and weigh about an oz. or so. The determine that Silencer Central provides for the burden of the Banish Backcountry on their web site (7.8 ounces) is with out the adapter in place.
The adapters add an oz. or extra to the burden of the Backcountry and since it’s essential to use one to connect the suppressor to your barrel, determine on the can weighing 9 ounces or so. Another choice is to connect Silencer Central’s Banish 30 Gold Muzzle Brake to your rifle, by which case you’ll be able to thread the Backcountry proper to it. In live performance with the brake, the Backcountry weighs a contact over 10 ounces.
Using the Adapters
My suppressor got here with the 5/8-24 adapter, which is the commonest thread pitch within the U.S. on bigger caliber (6mm and up) barrels. I additionally received a ½-28 adapter. That thread pitch is typical on AR-15 .223 barrels and rimfire rifles. This permits the Banish Backcountry to tug obligation on quite a lot of firearms.
The adapters have a bit over a 3rd of an inch of thread engagement, so when they’re screwed into the again of the suppressor physique there’s loads of materials to comprise the pressures generated by the shot. Silencer Central charges the Backcountry to be used on cartridges as much as .300 RUM, so it’s a stout unit that may deal with even the sportiest .30-caliber magnums.
The rear of the adapter has a raised hex nut form machined into it. That hex is 1-inch throughout and helps the consumer cinch the adapter snuggly into place. The adapters thread into the suppressor physique in a regular method—clockwise to tighten (“righty-tighty” for the mechanically challenged). The suppressor additionally threads this fashion onto the barrel.
I point out this as a result of it’s important that the adapter is secured firmly behind the can. When you take away the suppressor from the rifle, you need the adapter to unscrew from the barrel and never again out of the suppressor itself.
Silencer Central ships the Backcountry Banish with some blue thread locker to maintain the adapter in place. I haven’t used the thread locker on mine, which to this point has labored out high quality. By utilizing a wrench to safe the adapter to the again of the can after which hand-tightening the can on the barrel I’ve encountered no points.
Servicing the Banish Backcountry
Though the Banish Backcountry isn’t a completely user-serviceable suppressor for the reason that baffle stack is mounted in place, you do have entry to the principle blast chamber when the adapter is eliminated. This permits you to simply carry out a visible inspection of the innards and can make it easier to clear the can when the time comes.
Cleaning a Suppressor
Despite what some silencer producers say, it’s a good suggestion to wash suppressors periodically. The finest strategy to gauge whether or not a can must be cleaned is by weighing it on a scale.
One of the primary issues it is best to do if you get a brand new suppressor—aside from making an providing of because of the ballistic gods that your treasured tube has been launched from ATF jail—is to report its weight on an correct scale. I hold this knowledge in a spreadsheet, however you too can use a Sharpie to write down it straight on the can itself.
As you place rounds by way of the can and fouling builds up, weigh it once more every so often. Once you get a pair ounces of carbon and gunk constructed up within the can it’s time to give it scrubbing.
Start by soaking it in a solvent like CLP. Submerge it in a single day to let the chemical compounds do their factor. After that, put it in a sonic cleaner. You may also use a nylon bore brush to knock stuff free. Once you undergo this course of, weigh the can once more to see how a lot fouling you eliminated. You’ll by no means get the can again to the unique weight, however for those who can take away a lot of the buildup you’ve executed effectively. You would possibly must undergo the soak and clear cycle greater than as soon as.
Banish Backcountry Craftsmanship
Silencer Central did a pleasant job with the development of the Backcountry Banish. The titanium physique has a collection of shallow grooves machined on the rear of the physique to present the shooter some grip when attaching and detaching the suppressor.
The suppressor has a shallow taper on the rear of the physique and you’ll see barely raised rings from the welds that be a part of the baffles collectively. These refined visible parts hold the Banish Backcountry from trying like a easy tube however they aren’t overdone both.
I just like the ratio of the size to diameter of the can as effectively. Cans which are tremendous skinny add additional size to a rifle, which isn’t nice for searching purposes. And cans which are too brief and fats simply look goofy. The Banish Backcountry strikes a pleasant steadiness.
The engraved markings on the can figuring out the make, mannequin, serial quantity, caliber, and place of birth are cleanly executed. The lettering is small and unobtrusive however extremely legible.
The suppressor is completed in black Cerakote and will rise up effectively to laborious use.
Shooting the Banish Backcountry
I’ve run the suppressor on two rifles to this point, each searching rigs. One was a Savage Impulse Driven Hunter in 6.5 Creedmoor and the opposite is an H-S Precision SPR Pro Series chambered in 7 PRC. In each circumstances the suppressor carried out admirably.
I received really feel for the hearing-safe score on the Banish Backcountry whereas stalking hogs with out ear professional within the thick mesquite in south-central Texas. Mounted on the Impulse I shot a pleasant hog with out hurting my ears.
During my vary work, I all the time comply with the army rule of redundancy relating to listening to safety, which is “two is one, one is none.” Meaning I need two layers of listening to safety each time I shoot—both ear plugs mixed with over-the-ear muffs, or a suppressor with another sort of listening to safety.
Though suppressor firms wish to tout their merchandise as “hearing safe” it’s nonetheless a good suggestion to double up on the safety with any prolonged taking pictures session.
Typically, I’ll use Surefire Sonic Defenders with a suppressor and name it good. I extremely advocate the Full-Block EP5 mannequin as they block considerably extra sound than the EP3s.
Banish Backcountry Accuracy and POI Shift
I noticed no degradation within the accuracy of both rifle with the Banish Backcountry hooked up. As the standard of suppressors has typically improved over time it’s much less frequent to see teams open up when operating one.
In some cases, you’ll see accuracy enhance when combining particular rifles and suppressors, which is a bonus. In the case of the Backcountry the group sizes held regular. Both these rifles are correct on their very own—they’re solidly sub-MOA with manufacturing facility ammo—so there wasn’t a lot room for enchancment in that regard.
Though the Backcountry doesn’t weigh a lot, there’s nonetheless sufficient mass there to alter a rifle’s level of impression. In the case of my H-S Precision, which has a “magnum sporter” barrel contour, the POI shifted down about an inch or so at 100 yards. There was no horizontal shift in any respect.
Read Next: Best Rifle Bipods Tested and Reviewed
Silencer Central Purchasing Process
One of the good benefits of the Banish household of suppressors is how straightforward they’re to buy. Silencer Central takes as a lot of the ache as doable out of the process to accumulate a suppressor.
Anyone who’s been by way of it earlier than is aware of it’s a main problem, involving a pile of varieties, the necessity to get fingerprinted, and a posh and prolonged approval course of. While Silencer Central can’t management how shortly the ATF evaluations the paperwork, they do a tremendous job of creating positive all the main points are so as in order that your software doesn’t hit any snags.
The method Silencer Central automates the method of filling out the varieties electronically is a godsend, to say nothing of every thing else they do to verify a purchase order conforms to all the foundations and necessities. And the icing on the cake is that when the appliance is authorized, Silencer Central mails the suppressor to your entrance door. If I have been texting a good friend about this, I’d add a chef’s kiss emoji right here. I can’t advocate them extremely sufficient.
What the Banish Backcountry Does Well
The Banish Backcountry fulfills its mission as a light-weight, quiet, and high-quality suppressor for hunters. While there are some suppressors that trim a bit extra weight from their techniques, the Backcountry makes up for that by being straightforward to service and interchangeable with completely different threading techniques.
Thanks to its completely different thread adapters you’ll be able to run the Banish Backcountry on any .30-caliber or smaller rifle in your assortment. The adapters value $99, an funding that provides versatility to the can.
What It Could Do Better
The Backcountry doesn’t have any actual flaws or shortcomings. Getting choosy, the welds on the baffles could possibly be a bit extra even. They are thicker and extra pronounced in some spots than in others. But that’s a minor quibble.
Final Thoughts on the Banish Backcountry
The Backcountry isn’t low cost, however in my thoughts its versatility makes up for the worth. For a hunter or shooter eager to spend money on a single suppressor to run on quite a few rifles, it is a superb choice. And the truth that Silencer Central makes buying their suppressors really easy is an additional advantage.